The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for

quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor. Market is from backbone network installation to opto-electronics components production for quality splice.

Specifications:

• Applicable fibres : SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others

• Fibre Count : Single

• Cladding diameter : 80 to 150µm

• Coating diameter : 100 to 1000µm

• Fibre cleaved length : 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900

• Actual average splice loss : 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.

• Splice time : 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode

• Return loss : 60dB or greater

• Splicing modes : 100 splicer modes are available

• Splice loss estimate : Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.

• Attenuation splice function : Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an

• inline fixed attenuator

• Storage of splice result : The last 2000 results to be stored in the internal memory.

• Magnification : X / Y (300X magnification), or both X and Y simultaneously (160X magnification)

• Viewing method : By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor

• Tension test : 1.96 to 2.25N

• Operating condition : 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively.

• Tube heater : Built-in auto-start tube heater with 10 heating modes and up to 20 for reference

• Tube heat time : 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available

• Applicable protection sleeve length : 60mm, 40mm and a series of micro sleeves.

• No. of splice/heating with battery : 200 times of splicing and heat shrinking under with BTR-09

• Power supply : Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09

• Terminals : USB2.0 ( Mini-B) for data and video signal transfer to PC.

• Wind protection : Up to 15m/s wind velocity

• Dimensions : 146(W) x 159(D) x 150(H) mm. Including wind protector, monitor, and rubber protector. Excluding rubber foot

• Weight : 2.5 kg, with ADC-18 AC adaptor, 2.7 kg, with BTR-09 battery

• Electrode life : 3000 arc-discharges